45 ml Aluminum Injector for Soft Plastic Plastisol Fishing Lure Mold Tackle DIY Making Plastic Locking Nozzle

1.5 OZ Aluminum Injector for making soft plastic baitsAluminum injector has a standard 5/8" (16 mm) nozzle diameter, which is compatible with most engineered stone or aluminum bait moIdsEach best_nj injector is equipped with a locking nozzle that prevents without accidental exposure of the capBoth the nozzle and piston have a rubber sealing o-ring to prevent plastisol (soft plastic) from leaking.When using this injector please be sure to wear gloves since injector gets hot from the plastisol inside.The primary usage of this injector is to cast fishing injection bait moIds with hot plastisol (soft plastic) to create DIY baits.Attention: Pull the handle up very strongly before use, as the grease hardens in the cold The plastic handle may differ from that shown in the photo, have a different shapeREMEMBER the injector gets hot when plastisol is inside, use protective clothing like gloves, long sleeves, pants, and closed toe shoes (no sandals) when pouring hot Luresol. Wear appropriate safety goggles and provide adequate ventilation in your work space too (either a fan or personal respirator).

• Plastic Locking Nozzle: Safe fixation of the injector nozzle The plastic nozzle prevents the plastisol from cooling quickly
• Plastic handle: Сomfortable plastic handle protects your hands and makes injector operation usable.
• Volume: 45 ml (1.5 US Fluid Ounce). This volume is a perfect for small and mid size - it's light and easy to operate with. This size is recommended for baits of less than 5 inch.
• Material: Aluminum body. Aluminum alloy recommended itself as a light and durable material, which is suitable for injectors.
• Rubber sealing rings. There are two rubber sealing rings to prevent plastisol from leaking as well as to create more pressure during pumping.
• Injection port: 5/8" injection. This diameter has become a standard over the years for soft plastic bait injectors. It's an optimal size to create targeted pressurized plastisol flow.
• Plastisol does not freeze in the nozzle!!!